Connected vibrating suction-cup dildo with touch sensor – Mission 2

In Touch Sense mode, the sensor controls the vibrations: they start gently on entry, then grow stronger as the dildo goes deeper. In this mode, a short press of button A changes the baseline intensity. Button mode works like a conventional vibrator: each short press of button B cycles through the programmes, regardless of depth. To switch between modes, hold button A for three seconds. Holding button B for three seconds turns the toy on or off. Touch Sense mode suits moments when you want the sensations to follow your movements; Button mode is for when you prefer a steady vibration.

The suction cup adheres to smooth, non-porous surfaces: tiles, glass, mirrors, sealed wooden floors or a clean, level floor. Rough, fabric or dusty surfaces prevent it from forming a seal. For a firmer hold, wipe the surface, lightly dampen the base, then press down firmly and check the grip by hand. To adjust the angle, loosen the ball-joint knob, then tighten it again once you’ve chosen a position.

The app turns Mission 2 into a fully customisable pleasure toy. When you’re nearby, you can adjust the intensity with a slider, set vibrations to loop or run continuously, create your own patterns and save them as playlists, or download patterns shared by others. Vibrations can follow the rhythm of a song from your own files or Spotify, or respond to the volume of sounds around you. The app also offers a vibrating alarm and an exclusive game, Flappy Jumpy, in which your back-and-forth movements guide the character. From a distance, it lets a partner take control live, make voice and video calls, synchronise two toys and play in a group.

First, switch on Mission 2 by holding down button B for three seconds, then turn on Bluetooth on your device. Open Lovense Remote, tap ‘+’ and then ‘Add a Toy’. Mission 2 will appear in the list; simply tap it and wait for confirmation that it is connected. The app works on iOS and Android smartphones, as well as Macs. On a Windows PC, you’ll need the Lovense USB Bluetooth adapter, sold separately.

You both simply need an internet connection, however far apart you are. Connect Mission 2 to Lovense Remote, add your partner using the ‘+’ button, then one of you starts a ‘Live’ session from the conversation and the other accepts it. Your partner can then adjust Mission 2’s intensity and programmes from their own phone while you stay in touch by voice or video call, or by sharing photos and programmes. For a more open experience, you can also share a control link, while group D&S mode lets several people take turns taking control. This kind of play depends on trust: agree on boundaries, comfortable intensity levels and a signal to stop beforehand, and always keep the option to take back control through your app.

Paired with the masturbator Solace Pro, Mission 2 lets you share intimate moments from a distance through two-way, real-time control. Each of you connects your toy to Lovense Remote, then adds the other using the ‘+’ and starts syncing from the chat. Movements in Mission 2 then control the back-and-forth motion of Solace Pro, while movements of Solace Pro trigger Mission 2’s vibrations. Without Solace Pro, you can also use Mission 2 as a remote control: caressing it with your hand or mouth makes a Lovense toy worn by your partner vibrate at the same time, wherever they are. Before you begin, agree on how long you’ll play, the intensity levels and a signal to stop, and keep a voice or video call open so you can talk. Start at a low intensity: it’s harder to sense each other’s reactions from a distance, so it’s best to build up gradually.

Flappy Jumpy is a game exclusive to Mission 2 within the Lovense Remote app, where your back-and-forth movements guide an on-screen character. To play, switch on Mission 2 and connect it to the app, then go to the ‘App Gallery’ tab and select ‘Toy Control’ before opening the game. The Touch-Sense sensor turns each movement into an action by the character, making the session a playful challenge where rhythm becomes part of the game. Play alone to get a feel for the sensor’s sensitivity, or with a partner, guiding their toy as they take on the challenge.

Fully charge Mission 2 before using it for the first time, then at least once every six months, even if you haven’t used it. The red indicator light stays on while it charges and goes out when charging is complete. Do not use the toy while it is charging, and avoid placing the magnetic cable on a metal surface. Store it away from extreme heat and cold, which can weaken the battery.